Step 1 – Disconnect the battery

Tools Needed: 10mm Combination Wrench

Loosen the positive and negative battery terminals using a 10mm combination wrench and pull the terminals off the battery posts.

.

.

Step 2 – Remove the air filter box

Tools Needed: 10mm Socket Wrench with Extension, Pliers and Phillips Head Screwdriver

Loosen the 3 air filter box bolts using a 10mm socket wrench as shown in the image.

.

.

Using pliers pull the smaller hose clamp off and pull the small metal pipe out of the intake tube. Then unloosen the large hose clamp of using a phillips head screwdriver. You are now ready to pull the airbox out of the engine compartment.

.

Click Here for Step 3 and 4

If you enjoyed this post, make sure you subscribe to my RSS feed!