Step 21 - Support the tranny with an extra floor jack and then unbolt it.

Tools Needed: 17mm Deep Socket Wrench, Floor Jack, 2×4 Piece of wood.

Place a 2nd jack with a piece of 2×4 wood under the tranny. Then get your friend to grab a hold of the rope with some gloves. Once the tranny is supported you can start unbolting the lower front transmission mount using a 17mm socket wrench. Then Tell your friend to hold the rope tight and start unbolting the last 3 top engine mount bolts using a 17mm socket wrench.

Step 22 – Grab the tranny and wiggle it left and right to dislodge it of the engine.

Tools Needed: Gloves

Grab the tranny with your hands and start wiggling it left and right to dislodge it off the engine. Careful not to move the engine to much so it does not fall of the jack support. Once you get the tranny loose, hold it while your friend removes the 2nd jack out of the way and you can slowly lower it to the ground.