This is a 1993 Honda Civic How To bumper swap or removal for turbo installation.

Tools Needed: Philips Head screw Driver, 10mm Socket Wrench with Extension.

Step 1 Take a 10mm socket wrench and unscrew the 1 screw that is on the left and ridge side of the bumper just in front of the front wheels once you fold back the inner fender Depending if someone has changed the bumper already you might run into Phillips head screws instead of 10mm.

Step 2 Use the 10mm socket wrench and unscrew the two 10mm bolts that are underneath the bumper. Please use the included image for reference.

Step 3 Use a Philips head screw driver and unscrew the 5 Philips head screws that are located on top just in front of the hood latch, once you pop the hood. Once the all the screws are removed you should be able to just pull the bumper right off and replace it if needed. For reinstallation just follow the steps in reverse order.