It’s been a while since I cleaned my K&N Filter Charger so today I decided to do it. In the process I took some pictures for a Do it Yourself article.
6 Easy steps to take your dirty K&N Filter and make it clean again!
Step 1 – Unloosen the mounting bracket so you can pull the filter element of the intake tube
Step 2 – Spray the filter element with K&N cleaning solution and let is soak for 10 minutes
Step 3 – Rinse the filter under a faucet from the inside out. This will get the dirt and gunk of the filter
Step 4 – Once the filter is clean shake it off and let it sit in the sun till it’s dry. Do not use compressed air to dry it off because it could damage the filter elements
Step 5 – Spray the filter with the K&N Filter oil and make sure the oil has penetrated all the dry spots
Step 6 – Mount the K&N Filter Charger back on your Honda Civic and your ready to go
If you enjoyed this post, make sure you subscribe to my RSS feed!
